3D Printed Custom Drill Accessory Kit

Follow Jamie on Instagram: https://www.instagram.com/jamie.guan/ Check out Robo 3D printers: https://robo3d.com/ check out the HomeMade Modern page on shapeways: https://www.shapeways.com/shops/homemade-modern Link to STLs: Battery 1: https://autode.sk/2GFxReW Battery 2: https://autode.sk/2IdK8Eq Settings for Robo R2: Material: PLA Profile: Normal Quality (Recommend) Layer Height: 0.1mm Wall Thickness: 1mm Top/bottom thickness: 1mm Infill density: 20% Overlap percentage: 8% Print temp: 195 degrees celsius Build plate temp: 60 degrees celsius Diameter: 1.75mm Flow: 100% Enable retraction: checked Retraction minimum travel: 5mm Print speed: 50mm/s Travel speed: 100mm/s Initial Layer Speed: 15mm/s Enable cooling: checked Fan speed: 75% Regular fan speed at layer: 30% Enable support: checked Build plate adhesion type: Raft Raft air gap: 0.2mm Initial layer Z overlap: 0.1mm Raft top layers: 3